HVAC Installation Cost 2019 - What's a Fair Price for a New Heating and Air Conditioning Installation?

Those of you who read our posts regularly know that we built our reputation as a U.S. Veteran-Owned business that prides ourselves on giving people straight, honest answers to their questions...and there’s no question that makes people cringe more than asking, what does a new HVAC installation cost? Oddly enough, most contractors keep their air conditioning installation cost a closely guarded secret, as if the knowledge of how much it should cost will somehow change your decision when you have to buy a new AC. What I will tell you, is that the fair price of an HVAC installation will vary greatly based on the type of heating and air conditioning system installed, as well as the options needed or desired (Ductwork included? Zoning system?). In this article, we’ll discuss the five system features that affect HVAC installation cost, fair price ranges you can expect to pay for your new system, we will then perform an example calculation of how you can calculate a fair price, and finally, what you can do to keep from getting ripped off on your new HVAC installation price.

Tip: Don’t buy a new heating and air conditioning system until you troubleshoot first! You’d be surprised how often we used to get called out to peoples’ houses for a second opinion after they were told by some contractor that they needed a new HVAC system; they didn’t. 

Always troubleshoot first – here are a couple of helpful articles to get you started, along with a gratuitous, funny commercial of a grown-man crying:




ASM’s Disclaimer About HVAC Installation Costs

At ASM, we are not only utilized for our heating and air conditioning installations, furnace repairs, and other general HVAC applications, but we are called in from all over the United States for our HVAC consultation services to large companies. So, it is important for me to make a little disclosure:

  1. These prices are just guidelines, and are meant to give you an idea of what an honest, well-done HVAC installation costs. If you want to calculate a fair installation price, see the exact prices contractors pay specific equipment and other information, try this article: HVAC Installation Cost Calculator – The HVAC Design & Consultation Program.
  2. These prices are meant for residential HVAC installations only (prices differ for commercial HVAC).
  3. HVAC Installation Cost by Region (examples done using California) – subtract $800-$1,000 from the prices below if you live in a state that is not so strictly regulated, its insurance and licensing fees are cheaper, or just use our online calculator below.
  4. These are the prices for a proper installation from a professional – as a word to the wise, HVAC systems require fine tuning and the custom fabrication of parts during installation to work properly, otherwise they will likely fail prematurely. But there are plenty of people who will do it for cheaper than this, using substandard, used, or stolen equipment (stolen from construction sites and new housing developments). Or, they are using unskilled laborers with no experience, etc. But HVAC is not a “we’ll figure it out trade;” there is a right way and a wrong way to do things. There are just too many predatory companies out there, so be careful. I’d highly recommend not skimping on your HVAC contractor. If you go cheap, you will typically pay more in the long run...and in California, that will be a lot!
  5. We are doing this to help keep you from being ripped off! Unfortunately, some people will likely take these guidelines as “set-in-stone” price quotes, and not realize one fundamental truth:
  6. Asking how much an HVAC installation costs is kind of like asking, “how much does a new car cost?”  Well, are you buying a Porsche or a Honda? Is it a 911 or just a Boxster, and are you going to get the leather seats? Likewise, are you going to get a Carrier or a Goodman air conditioner? Does the ductwork need to be replaced? These are all questions that will affect your HVAC installation cost, so let’s take a closer look.

More on our opinion of Carrier and Goodman HVAC products can be found here:



hvac installation cost

A Quick-Guide to HVAC Installation Cost – Choosing a Brand

Look, let’s be honest…most of you are here to get a quick snapshot of what the different units cost, so I won’t bore you with our lengthy explanation of how to know a fair price when you see one. Instead, I’ll give you – the impatient ones – your quick-look so you can be on your way. 

What you might not know is that the brand you choose is one of the most important factors in determining a fair HVAC installation cost. So, before delving in-depth, let’s take a quick look at the average prices of a new air conditioner and matching coil by brand…keep in mind, these are the average prices (by brand) that contractors pay for your AC equipment, and it is meant to give you a rough guideline until you are closer to buying:

Average Air Conditioner Cost by Brand (w/ Matching Coil)

As you can see below, some brands are signifficantly more expensive than others.  Doing your research on the AC prices of different brands can have a hige impact on your HVAC installation price.  Let's take a look:


HVAC installation cost - equipment price by manufacturer graph


As you can see, there is terrific value in brands like Goodman and Bryant.  They use the same internal components as their "name brands" (Amana and Carrier respectively), but are signifficantly cheaper.  Here's a breakdown of the average price for equipment by manufacturer, not including installation:

  • Amana $1,217
  • American Standard $1,655
  • Bryant $1,207
  • Carrier $1,678
  • Goodman $1,076
  • Heil $1,277
  • Lennox $1,737
  • Rheem/Ruud $1,213
  • Trane $1,693
  • York $1,403 

HVAC Installation Cost – The Factors

Before we get to HVAC installation prices, we will first need to briefly discuss some terms, definitions, and factors that will affect how an honest HVAC installation company determines their prices. Notice that I said honest. Unfortunately, there are dishonest people out there. There always have been, there always will be, and there is a good chance that you had an experience with such a contractor, which is what drove you to read this article. I can’t teach you how to tell if someone is honest, but I can give you the knowledge to help you decide. Take a look at How to Choose an HVAC Contractor for tips on what to look for.

Keep in mind that this article deals primarily with HVAC installation costs as a whole. For costs of specific ACs, heat pumps, or furnaces, try:

hvac installation tonnage

1. House Size Affects HVAC Installation Cost.

First, you need to understand that central air conditioners come in a variety of sizes, and the size will affect air conditioning installation cost. 

Air conditioner size is measured in “tons.” However, the tonnage of an HVAC unit is not actually based on its weightA “ton” is simply a measure of an air conditioner’s ability to cool your home. One ton is the ability of your air conditioning system to cool 12,000 BTUs (BTU stands for British Thermal Unit) in an hour. Likewise, a “2-ton” central air conditioner is able to cool 24,000 BTUs per hour.

So, now you are likely asking, what the heck is a BTU

A BTU is the amount of energy required to heat or cool one pound of water by one degree Fahrenheit. So a 1-ton air conditioner can cool 12,000 pounds of water by one degree every hour. That’s all it means, so don’t let yourself be lost in jargon! How this affects your HVAC installation cost is that the larger your house is, the more tons will be required to heat and cool it.

Typically, one ton is required per 400-600 sq/ft. of floorspace. So, a 2,000-3,000 square foot house would typically take a 5-ton HVAC unit. For more information on how to determine proper HVAC size, read:

2. Ductwork Affects Air Conditioning Installation Cost

Unfortunately, one of the most heartbreaking things for us is when someone writes us to ask, did I pay too much for my new air conditioner? They tell me they paid $10,500 for a new furnace and AC system installation, and ask if that’s fair. 

I say, "yea, that’s a pretty fair price for an air conditioner installation, what type of ductwork did they install?"

“Well, they didn’t replace the ductwork...but the system runs like new!”

It will typically cost an additional $2,000-$3,000 for all new, standard, R-6 insulated, Mylar-sheathed flex ductwork. Why so much? Because it is extremely labor intensive to do properly and takes a couple of days (keyword: properly).  Here's some tips:

  • Ductwork should have custom fabricated manual dampers at each T-Y junction for air balancing (if not, one room is blowing like crazy, and one has no airflow.  Many contractors skimp on this to save time and money, so ask questions!).  
  • It should be custom-insulated at each T-Y junction to prevent condensation and mold problems (also read: Condensation on Ductwork, and how to fix it).  
  • Each joint should be double sealed and crimped (otherwise the ductwork will separate after a few years, air conditioning your attic instead of your house!).
  • Ductwork should be strapped to your attic properly to prevent duct migration.

Before you even ask...the answer is “no," an inspector will not see most of these things (except for the strap), as they will mostly be internal to the ductwork.  Besides, inspectors work for the city and are mostly concerned with code violations.

Look, we will talk more about prices in a bit, but the bottom line is this:

  • There is a time to replace the ductwork, and there is a time not to replace the ductwork – make sure that your price is reflected accordingly!

More on how to get a fair price can be found here: HVAC Installation Cost Calculator


HVAC installation cost by brand

3. Brand of Equipment Affects HVAC Installation Cost.

Previously discussed...

Just like the car example above, are you buying a Porsche or a Honda? Both are reliable; their prices are…a bit different. A Carrier is a fantastic HVAC unit, but it is typically going to be $800 – $2,500 more expensive than comparable units from Goodman, and there are other options out there that are just as reliable.

Lennox, on the other hand, is probably the most expensive unit out there and I can’t stand them.  In our (humble?) experience, they have a horrible logistics chain, making repair parts difficult to come by (sometimes taking weeks), poor customer service, and the parts cost three times as much. That’s not what this article is about, so read more in: Carrier vs. Lennox Furnace Review.

My point is that the brand of equipment you choose is going to affect your HVAC installation cost greatly. People often call us for an air conditioning installation job and say, “I would like to install Carrier equipment.” Now, if you are a future client of ours, I’ll have to warn you – I can be a bit of a smart-ass. Why can’t work be fun? Besides…I was in the Navy for 11 years, what do you expect. 

So, naturally I respond with, “you don’t tell your doctor which medication to prescribe you, do you?” The point is, on the residential level, who you get to install your HVAC unit is far more important than which unit you choose.  Keep your options open and let your HVAC contractor make a few recommendations – that’s why you spent time finding a reputable contractor!

For more info on the different unit brands, take a look at:

What about features? Does someone in your house have asthma and require an integrated HEPA filter? More can be found at: How to Reduce Asthma Symptoms

SEER HVAC installation cost

4. SEER Value Will Affect Your HVAC Installation Cost.

I won’t get into what SEER is because that is discussed in another article (the article is SEER vs. EER and How to Use Them), but realize that SEER will affect your HVAC installation cost. Simply put, SEER is a measure of your air conditioning unit efficiency. The higher the SEER value, the lower the cost to run it.

I personally recommend getting no more than a SEER-16 unit when you have your new HVAC installation done.

“But Tim, Tim! All the other contractors said that SEER-21 is the best, and it will pay for itself!” Once again, being smart, I retort...If the other contractors are so great, why are you reading this article in the first place?

Joking aside, here is the reason why I recommend SEER-16 and no more: the reason some are pushing the high-SEER models is because they are a lot more expensive, which makes them more money on their markup

The reason I am against them, is because (since you asked) anything manufactured over 16 SEER works usually isn't needed unless you live in a desert, and you plan on living there the rest of your life.

Typically speaking, the lower SEER, more basic models are also more reliable.  Reliability is big with us, so we steer clear of features with reliability issues, and it’s as simple as that. When you factor in the price of repairs and the extra expense of the 21-SEER, you may actually lose money! 16 SEER is the sweet-spot, and it is key to reducing your HVAC installation cost.

5. Project Difficulty is a Big Factor in HVAC Installation Cost.

Here’s where we get into the art of HVAC installation – if you have a small, difficult to access attic, or you require many custom fabricated parts (every installation will have some fabricated parts – another reason not to skimp on your contractor), or if you have blown-in insulation, the difficulty increases. 

Do you live in a historic home and want to tie your new system in to work with existing features? The price will go up to do the job right. All of these things add up to slow down the HVAC company, which takes more time, which costs more money for labor and parts. This is especially true if they are a legitimate company which is licensed, bonded and insured. Simply put, this is the “X-Factor” in your HVAC installation cost. Again, you could get people to do it for cheaper…but you won’t be happy with the results, I promise.

But Tim, doesn’t this mean that a less-than-honest air conditioning company can just charge what he wants and say that it’s a difficult job? No. You see, dishonest contractors, typically, aren’t the brightest people (I figure if you’re still reading this, you’re warming up to me so I’m taking off the training-wheels). They aren’t smart enough to take difficulty into account, and will probably get confused if you ask them about it. They will tell you things like, “that’s how much the unit costs,” or “California has a new law that magically adds $5,000 to the price.”  Trust me, follow your gut, and you’ll be able to tell who the honest contractors are...or just use one of our ASM-approved contractors.

Also try:

Tip: Don't Overpay for Your HVAC Installation

If you’re anything like most of our readers, you’ve spent hours online researching HVAC information in preparation for replacing your old heater or air conditioner. I’m the same way; it’s a big investment! You may want to consider saving yourself some time and money by getting an HVAC-Facts Report from this online HVAC installation cost calculator.  Take a look:


HVAC Installation Cost Calculator

HVAC Installation Cost – The Price Range

Okay, the part you’ve all been waiting for! The description of HVAC installation cost. If you skipped down to this part, then the answer is, “no.” Scroll up and read the section before...you must earn this! Besides, it’s important information for following alog with the prices below.

The HVAC installation costs below are based on residential installations only, and are priced for a single unit. Two units should be about twice the price. “Tim, shouldn’t there be a discount?” If people start giving you discounts, they are probably charging you too much to begin with.  That’s our philosophy anyway. Twice the parts and time should be twice the price from a fair contractor. The prices listed include component parts (with warranty), labor, and all materials for a complete HVAC installation.

  • Important Tip: Don’t just pay attention to the high-end of the price range! – which is what I know you are all looking at, but also look at the low range. If a contractor is cheaper than this, ask “why?” Usually it is because they don’t have liability insurance, workman’s compensation insurance, are unlicensed, all of the above, or worst yet, they don’t use HVAC technicians. You are spending a lot of money.  Make sure that they are licensed (In California, check here at CSLB License Checker) and insured.

California has a big problem with people stealing new equipment off of construction sites and passing themselves off as HVAC contractors. Make sure they use real HVAC technicians, not unskilled laborers...otherwise you’ll pay more in the long run. 

As an example, 30-40% of our residential business is from fixing improperly installed HVAC units from “bargain contractors!” Just a thought…pay the money to have a pro do it. It will cost you less in the long run and it will be done right.

Typical Price Range for a New HVAC Installation.

We divided new HVAC installation cost into three groups: first, the Change-Out, which is an installation of just your HVAC components without the ductwork; Full Installation, which is the installation of all HVAC equipment including ductwork; and finally, Full Installation with Features, which is a full installation with additional features such as a zoning system or media filter with a complimentary Ferrari Portofino.

Change-Out HVAC Installation Cost

Price-Range: $6,000 to $8,800

Typical Job Time: 1 Day

A simple change-out should range in price from $6,000 to $8,800, depending on which unit you go with and any added features.

  • Tip – Be careful with change-outs. Ductwork deteriorates and sometimes has to be replaced.  It is only if the ductwork is in fantastic condition that you should get a change-out without ductwork (Remember – the ductwork has already been there for 15-20 years, and now it will be there another 15-20…it has to be in good shape). However, many HVAC installation companies like to push change-outs because the ductwork is the most time consuming part of the job, and a change-out is quick, easy money. Realize that it’s only about 15-20% of the jobs that qualify for a change-out, so be careful.
  • If anyone is doing a change-out for less than $5,000…RUN…


Full Replacement HVAC Installation Cost

Price Range: $9,200 to $12,300

Typical Job Time: 3-5 Days

A Full Installation is the most common type of HVAC installation for a reputable contractor. The ductwork adds two days of labor and about $2,000 to $3,000 to the price, but realize that this is a very important part of your HVAC system. Although it might sound like a good idea to reduce HVAC installation cost and get a quick change-out, realize that there is dirt and debris collecting in your ducts, and the ducts themselves develop holes and full breaks over the lifetime of your unit, all of which may be hidden from sight by insulation. Remember, many contractors will push a quick change-out on you because it is easy and good money for them – you need to be involved and ask questions.


Cost of Full HVAC Installation with Additional Features

Price Range: $13,100 to $17,000 (to infinity if you keep adding and changing things)

Typical Job Time: 3-7 Days

The sky is the limit. I am a big fan of adding zoning systems, but realize that this will typically add $2,300 to $3,500 (or more) to the price. “Why a price range, isn’t it just a part?” No, the part then has to be installed, and the customized ductwork required will vary based on the difficulty of the job and layout of your attic. It is very labor intensive, and most people don’t do it right. It should also include a bypass damper and ductwork! Simply put, the more you add, the more it will affect your HVAC installation cost.

hvac installation cost residential

How to Calculate a Fair HVAC Installation Cost

The price ranges above should suffice for 95% of you…but there are always my trouble-makers out there who need to know every single detail before making purchase. This section, my friends, is for you…nerds.

Similar articles:

Calculating a Not-So-Fair Price

I know that there is a lot of mist, mirrors and voodoo involved in understanding how contractors come up with their bids. But, to be perfectly honest, it isn’t rocket-science. After all, as my wife just said, have you met an HVAC contractor…? (Hey! I think that one was meant for me…I digress).

The Numbers Game – The Wrong Way to Calculate an HVAC Installation Cost

This is honestly not a forum for bashing other contractors, so let’s keep this part professional…well, as professional as I can be.

There are two types of contractors:

  1. Those that play the numbers game.
  2. Those that don’t (aka “normal” contractors).

Many contractors do not actually calculate bids. Yes, I’m serious. They instead rely on experience, and a little bit of artistic license to formulate their bid. But these guys aren’t stupid…these are the guys that play the numbers game.  I’ll explain, but first there are some facts that you need to know:

  • The average HVAC contractor gets one out of every five bids.
  • The average profit for an HVAC installation is around $2,000.

But, if a small company is bidding five jobs per day in the summer (not uncommon), and overbids all of them at $4,000 profit per job, you may only get half of the jobs that you normally would have, but you still break even:


Example 1 – “Normal” Contractor: (gets 1/5 of the jobs bid) X ($2,000 profit per job) = $400 profit per bid

Example 2 – “Numbers Game” Contractor: (gets 1/10 of the jobs bid) X ($4,000 profit per job) = $400 profit per bid


Here’s the interesting part…let’s think about that for a moment…these guys make the same amount of money as the so-called normal contractors, so why not just do it the right way? Two reasons:

  1. They work less jobs, thus increasing profits – think about it…if they got only half of the jobs, then they only pay half of the money required to pay employees, expenses, etc., but still have the same amount of net profit. In fact, if you do the math, they actually make more profit that their competitors do…twice as much, once you factor in their savings form only doing half of the jobs at the same amount of profit (Total Revenue – (half the normal expenses) = twice the profit). In other words, they save money by doing half of the jobs as others, for the same profit, thus increasing their overall profits.
  2. They actually get more than one in ten jobs – believe it or not, these guys actually get more than half of what their competitors do. They may turn some customers off with a slightly higher price, but they more than make up for that in increased profits from the person who does decide to hire them…they play the numbers game.

HVAC installation price - propper cost bidding

How Can They Do This?

They can do this because consumers are uninformed as to what a fair HVAC installation cost should be (hence this article). Seriously…it isn’t hard for me as a contractor to say:

“Yea…but the other guys don’t know what they are doing…you’ve got an old PQ-15 valve on your system, and that’ll be hard to change out…plus the parts that are compatible with your line-set are quite expensive.

Is there a such thing as a PQ-15 valve? No…but how do we know? And oh, by the way, there are only two types of line-sets: 3/4 inch, and 7/8 inch. All modern equipment runs on a 7/8 inch line-set, so the only time they’ll have to change something is if you have antiquated 3/4 inch line-set from the 60’s or 70’s. I’m digressing though…the point is that they can easily prey on uninformed consumers…like you, baby bird! Don’t worry though…you’ll be flying by the end of this article.

The Proper Way to Calculate HVAC Installation Costs

This section is actually a lot simpler, as we will be discussing the proper way to calculate your HVAC installation cost. Contractors who use this method are the normal, old-school contractors who stick to the age old equation:

[(Price of Equipment) + (Price of Labor) + (Misc. Materials & Expenses)] X 1.4 = Bid Price

The fair profit margin for a normal HVAC installation price is 40% profit. Before you lose your head, don’t forget that contractors still have to pay for their insurance, advertising, and administrative fees out of this before they get the money that supports them and their families. That’s just the nature of the business, and they have to eat!

1. Enter Price of Equipment to Calculate HVAC Installation Cost

For this example, we will be generating an HVAC-Facts Report online right from our website to help us calculate a fair HVAC installation cost. In order to calculate your installation price, the first thing we’ll need is some pedigree information about your required HVAC equipment. Luckily, this is calculated for us after answering a few questions:

  1. Required size of your air conditioner: 4-ton
  2. Required size of your furnace: 90K BTU
  3. Desired SEER value: 14 SEER
  4. Desired AFUE value: 80% AFUE

HVAC Installation Cost - Calculator ResultsExcerpt Page 2 of 12 from an HVAC Design & Consultation Program Final Report


2. Pick a Custom Brand, Location, and Model of Equipment to Calculate HVAC Installation Cost by Region

Next, you may want to look up the price of the equipment that you want and factor it into your calculated HVAC installation cost. Finding these prices is the tricky part. These are based on the brand and model that you’d like to choose, as well as the calculations we just made in step one.

Unfortunately, manufacturers and contractors don’t publish this information…it’s a secret. Why? Who knows…but we have access to a full contractor pricing database of 1,000’s of different units in our online HVAC installation cost calculator, so let’s choose one for our example calculation. We’ll go with Carrier equipment, since our readers always bother us about them (despite us telling them that they are overpriced):


HVAC Installation Cost CalculatorPicture of Program Use – HVAC Design & Consultation Program


3. Factor in Labor Costs and Other Expenses

We ended up deciding to go with a Carrier 16 SEER air conditioner, and an 80% AFUE furnace.

Now we just need to factor in our other expenses for the project to drive at a more accurate HVAC installation cost estimate. If this sounds like we’ve done this a few times, that’s because this is actually how we bid jobs! 

The program we use to help us do it is a slightly less user-friendly version of the calculator we make available to you. Regardless, let’c see what it came up with.

Let’s take a look now at some of our expenses.  We did choose Carrier, but keep in mind that they’re also expensive:

HVAC Design & Consultation Program Report

4. Add in the Contractor’s Profit Margin to Calculate a Proper HVAC Installation Cost

So, the total price to a contractor for this project is $7,195.77 (Carrier is expensive), which we’ll use to calculate a fair HVAC installation cost. As I said, we typically use 40% in the industry to cover our own personal profit, as well as our insurance and other expenses. Let’s take a look at page three of a Final Report from our own online HVAC calculator, the HVAC Design & Consultation Program.

As you can see, if we know what the contractor is actually paying for specific equipment, we know what their labor rates are, and we know what they bid the project for, then we can also use some basic algebra (or just let the program do it for us because we’re lazy) to figure out how much of a profit they are making off of us (you) at different bid prices:

HVAC Installation Cost - Fair Price RangesFair Price Ranges for Sample HVAC Design & Consultation Program Report


HVAC-Facts Report – The Results

So, by this point we have done our calculation and determined that around $10,074 is a fair HVAC installation cost for the Carrier equipment that we chose for our example.

The reason this is so expensive is because we chose Carrier, 16 SEER equipment! Had we chosen a different brand or SEER value and run that through the program, the calculated HVAC installation cost would have been closer to $7,000…food for thought, hint, hint…

On the bright side, if you use the online calculator, it will also tell you what the ideal SEER rating is for your area, so it takes some of the guesswork out. If you’d like to know more about the program we used in the calculation above, here’s some more information:


Final Tips to Keep From Getting Ripped Off on Your HVAC Installation Cost.hvac installation cost santa clarita

A review of some tips from this article, as well as a few more:

  1. Spend time researching your HVAC contractors. Who installs your unit is far more important than what they install. I’ve repaired Carrier units that were 3-years-old because they were improperly installed, and I’ve seen Day and Night HVAC units that were 22-years-old and running strong. Make sure that they are licensed, bonded and insured.
  2. Be careful with HVAC change-outs.  Change-outs are only about 15-20% of the HVAC installation industry. Decrease HVAC installation cost by investing in new ductwork now if needed. Your ducts wear out too, and make sure that your ducts are in fantastic shape if you do this. Many contractors push this because it’s easy and cheap for them, with good pay-off. Do your research and replace them if you need to in order to avoid doing it later, as well as avoid potential health hazards from using old, broken ductwork.
  3. Asbestos removal tip.  Don’t trust any HVAC installation company that says that they will remove asbestos for you. They will do either one of two things: remove it and do a horrible job because they don’t know how (an illegal act in California, finable by up to $250,000), or they will say they did and never actually do it, which is dangerous to your health. Any HVAC contractor worth their weight will know not to touch it. Call an asbestos abatement company – it should cost around $500-$1,000, and your HVAC installation company will come in right after them and do the installation to decrease cost and inconvenience.
  4. Stick with a maximum of 16 SEER units in most cases.  Like I said above, contractors push higher SEER units because they make more money, but these units can be expensive at this stage of development, and can drive up your HVAC installation cost.  21 SEER units run about twice the price of a 14 SEER unit, so unless you live in a desert and plan on being there for 30 more years... Likewise, a 16 SEER unit typically costs only about $600-$1,000 more than a 14 SEER, and will usually pay for itself over the lifetime of the unit.
  5. Tonnage will increase price by about $300-$400 per extra ton of cooling.  Size your unit properly for your house and don’t worry about this as far as price is concerned.
  6. Try to find a company that does commercial HVAC as well. The experience required to do commercial HVAC applications is typically a good way to ensure that the technicians that work on your project know what they are doing – a key to keeping your HVAC installation cost down. It isn’t fool-proof, but keep it in mind as you do your research.
  7. Be careful of dishonest HVAC contractors. There’s no magical formula to see if an HVAC contractor is scamming you, unfortunately, but remember that they typically do this in one of two ways: first, they are charging grossly low prices (far below everyone else), or second, they aren’t including what everyone else is. In the first situation, they will charge you change fees, other hidden fees, or they stole the equipment and are passing themselves off as legitimate contractors (very common in California these days). In the second situation, they are charging you a very fair price, but aren’t including what the other contractors are (i.e. charging $10,500 for the installation which is fair, but not including the ductwork which is a scam unless there is some other, complex stuff going on there).

You might not need a new air conditioner – don’t spend the money just yet – other related ASM articles include:

Final Thoughts on HVAC Installation Cost

We hope you found this article on a fair HVAC installation cost helpful. In the end, you’ll be alright so don’t worry too much. Do your research on reputable air conditioning contractors in your area, and spend time making sure that you have a company that you can trust – it will cost you less in the long-run, trust me. Take your time, follow the tips above, and you will end up with an HVAC installation cost that is more than reasonable, keeping your family comfortable for years to come. For more on topics like this, see: ASM’s Air Conditioning Blog.


Tim K.
About the author
Tim K.

The University of Virginia - 2005 / The Wharton School of Finance - 2016 / U.S. Naval Aviator 2005-2015. At All Systems Mechanical air conditioning and heating, we believe that the experience our clients have is every bit as important as the products they receive. Simply put, our results speak for themselves, and we'd be happy to help. If you're in the market for a new AC or furnace, make sure that you get a fair price! Try our online calculator; click the tab on the top of this page for more information.

Best Local HVAC Savings

Top 10 Brands
Repair or Tune-ups
Energy Efficiency
Contractor Prices

We Can Help You!

Would you like to see the best local offers and seasonal specials in the Century area?

Would you like to add any additional notes to your request?



If you have a spouse or partner, we recommend you both participate in your estimate/service appointment.

We want to make sure everyone's questions are answered.

Local request for new heater.

We value your privacy. By submitting this form, you consent to receive a call, email, or text from a specialist who may utilize auto-dial technology to contact you, even if the number you provided is on a do not call registry. Your consent is not a condition to purchase any product or service. Your specialist will listen to you, understand your current situation, and provide your consultation at no obligation.

Thank you. We've received your request.

A representative from NextGen Air (BBB A+ rated) will be calling you shortly to confirm your appointment. For immediate assistance you may call (855) 715-4500.

Limited time specials:

  • $68 Complete A/C System Tune Up
  • System/Replacement as low as $5995
(855) 715-4500 - 7 days a week

What Should You Pay for HVAC in your area?